RSWM-3X8VVER
Modern radio monitoring systems need an unrestricted access to many antennas from a variety of receivers. By using the non-blocking architecture of RSWM, specialized and general-purpose receivers can be used alongside each other and chose any of the available antennas without interference between the receivers. Due to its band-selective inputs, the high linearity and low noise figure of the device ensure excellent signal integrity on the path from the antenna to the receiver. Low cross-talk enables the reception of weak signals on one antenna in the presence of strong signals on a different antenna. The very large bandwidth of the wideband input covers all commercial cellular and ISM communication bands up to and including WiFi7.
Section VHF (2x): 30...1000 MHz, Section UHF: 30...6000 MHz MIL-STD-810G environmental qualification MIL-STD-461F EMC qualification OIP3: 30 dBm typ. (VHF section)
AC or DC Power Supply Options
The RSWM-3X8VVER comes in variants designed for either DC or AC mains power supply, catering to both stationary and mobile applications. Both variants support a broad input voltage range, whether AC or DC.
Wear-free Solid-State Switches
The RSWM-3X8VVER incorporates modern solid-state switching elements, guaranteeing rapid response to operational inputs and an unlimited number of switching cycles with minimal maintenance requirements.
High Channel Isolation
To prevent unintentional signal coupling between different signal types, the device provides high channel isolation. Strong and weak signals in adjacent radio channels do not affect each other.
Versatile Control
The RSWM-3X8VVER is equipped with multiple control options for user convenience. It features LAN and USB remote control interfaces. Depending on the customer's needs, the system can be managed using SCPI-based ASCII commands via its interface ports.
letzte Änderung: 22.08.2025