AMP300600040L

10 W Wideband Amplifier

AMP300600040L is a compact and high dynamic amplifier module. It is suitable for frequencies from 300 MHz to 6000 MHz and is realized in 50 Ohm technology.

The amplifier is characterized by its high output power and good intermodulation properties in combination with a low noise figure. This makes it ideal for applications in the context of EMC conformity tests.

EMC 300 ... 6000 MHz 5G, UMTS, LTE, Wi-Fi, GSM 40 dBm | 10 W

Datasheet


Special Features

Due to the high output power in combination with excellent linearity characteristics, the amplifier is suitable for professional applications in which digitally modulated signals have to be amplified to higher powers.
The AMP300600040L has an internal self-monitoring function for current consumption and module temperature. The status of the self-test can be queried via floating signal contacts.
The amplifier has an internal reverse polarity protection for the operating voltage.

Robust Design

The amplifier module AMP300600040L is mounted in an aluminium housing. In addition to protection against mechanical damage, this offers the best shielding to suppress EMC influences from RF signals from the environment.


Universal Heat Sink for AMP-L Amplifier Modules

Universal Heat Sink UHS-1 is a compact heat sink for cooling of medium and high-power amplifier modules from Becker Nachrichtentechnik. Up to two different AMP-L modules can be flexibly attached to the flat side of the heat sink. With the option of installing up to six fans, high cooling performance can be achieved. If active cooling is required for the customer application, the cooler will be delivered with pre-installed fans. The heatsink is also supplied individually prepared with captive screws depending on customer requirements. On the bottom side is has holes for mounting in housings by the customer.

WEB_OPP_UHS1_1xAMP300600040L_0FAN_V1.00.jpg





Latest modification: 18.12.2023