FDMX-PT is a compact table top unit for the selective splitting of a frequency multiplex signal into the different broadcast bands and to the L1 satellite navigation band. The device has programmable current sinks for the simulation of active antennas and for intensive tests of phantom supply sources and a voltmeter in each output. The presence of phantom voltages at the outputs are indicated by LEDs. The control of FDMX-PT occurs via USB remote interface with ASCII strings.
programmable current sinks Dual AM/FM, DAB/DAB-L, DVB-T, GNSS, SDARS
Splitting in Broadcast and GNSS
FDMX-PT has coded Fakra connectors for the direct connection to the antenna inputs of the devices under test (DUT). As output signals the broadcast bands AM/FM, DAB/DAB-L, DVB-T und SDARS and the GNSS L1 band for satellite navigation (GPS, Galileo, GLONASS, Beidou) are selective available. The broadcast bands AM and FM are dual available at a combined Fakra connector. A RF cable set for the connection of the FDMX-PT to the antenna ports of the DUT is part of delivery.
Adjustable DC Loads
In addition to the features of the FDMX, FDMX-PT provides six programmable DC loads. Each of it can be set in the range 1...300 mA in 1 mA steps. FDMX-PT includes a six channel DC voltmeter for phantom voltage tests. Programming load settings and querying the voltage values is done via USB interface using straightforward ASCII commands, based on the SCPI standard. Load settings can be stored in the device for standalone use without PC.
The integration of adjustable loads and voltage measurements in the compact design of FDMX-PT saves both space and costs for phantom voltage test equipment.
Programmable Current Sinks
FDMX-PT has six programmable current sinks which are independent settable in the range 1 mA … 300 mA in 1 mA steps. Each channel has a voltmeter for the test of phantom supply sources in the DUTs. The settings and the query of phantom voltages is done via USB remote interface at the device. The control occurs with ASCII strings which are orientated to SCPI99 standard. To enable an operation without computer, the set values are storable in FDMX-PT.
High Quality, Compact Design
FDMX-PT has a rugged shielded metal housing and is suitable as table top unit. The internal voltmeters avoids cables to e.g. external multimeters. The external measuring cables act as antennas and can couple interfering radiations to the measuring signals and interfere with sensitive measurements.
FDMX-PT is used in combination with the multicouplers of the WSDU series. It is used in signal distributions for the test of multimedia systems for automotive, in research and development( R&D) and in production.
Latest modification: 27.01.2021