iAMP300600047-R

50 W High Power Scalar / Vector Amplifier and Signal Generator 300…6000 MHz

With the iAMP300600047-R, Becker Nachrichtentechnik offers an all-in-one semiconductor-based power amplifier. The device delivers up to 50 W output power in the frequency range from 300 MHz to 6000 MHz.

Internal level controls, so-called ALCs (Automatic Level Controls), ensure precise and long-term stable output power and eliminate temperature influences, fluctuating input levels and VSWR influences. The iAMP300600047-R also has an internal generator for CW and pulse signals. The software functions of the can be conveniently controlled via the web interface or via ASCII commands. The amplifier is equipped with a robust stainless steel housing. All amplifier models of the AMP series are designed in 50 Ohm technology.

CW and pulse generator guided webinterface S-Parameter Measurement 47 dBm | 50 W 19", 2U

Datasheet


Internal sine and pulse signal sources

The iAMP300600047-R has frequency-stable, internal sine and pulse signal sources that can be switched to the HF and V/UHF amplifier path. Optionally, the amplifier sections can also be fed via external signal sources. The device has an input for connecting an external signal generator.

Remote control interfaces

The device can be remote controlled via the remote control interfaces LAN and USB and can be controlled with ASCII character strings. Measured values ​​such as device temperature, VSWR and HF output power can be read out from both outputs via the remote control interface.

Graphical user interface

All relevant settings of the iAMP300600047-R can be made intuitively via a clear graphic user interface of the device.

VSWR monitoring

The output power and the standing wave ratios at both outputs are permanently monitored. If an impermissible standing wave ratio is exceeded, the amplifier section is automatically deactivated.

Self-test functions

The function of important circuit parts in the iAMP300600047-R is permanently monitored during operation. If set values, such as the maximum operating temperature, are exceeded, the device triggers an error message.

Robust design

The amplifier is housed in a high-quality housing with an attractive appearance and is intended for installation in industrial 19" cabinet systems.

 

iAMP300600047-VR: Variant for Vector Signal Processing

VAR1: Vector Signal Generator

In the iAMP300600047-VR variant, the device integrates a software defined baseband generator and an I/Q modulator to generate high-power multi-standard vector signals for wireless, cellular, automotive and broadcast applications.

VAR2: S-Parameter Measurement Set

The S-Parameter measurement set offers the possibility of vectorial return loss (S11) and insertion loss (S21) measurement through a connected DUT. This function is ideal for characterizing measuring devices such as antennas. For S21 measurement, the device is equipped with an additional MEAS port.

 





letzte Änderung: 18.12.2023